How to use the Block Remover
There are two ways to disassemble blocks using the Block Remover.
Method 1: Using the 'claws' at the tip of the remover
- Insert the claws between the connecting part of the blocks and push from the sides. Once the connecting part is loosened, pull the blocks by hand.
- Using the Block Remover to pull the blocks after loosening the blocks can break the blocks. Please be sure to disassemble the blocks by hand once they are loosened enough.
Method 2: Using the 'bumps' inside the Block Remover
- Put the blocks between the Block Remover.
- Slide the blocks so that the 'bumps' will hit the connecting part and loosen the blocks.